Toont alle 9 resultaten

11.1V 1300mAh 20/40C Battery – AN/PEQ Size

19.95 incl. BTW

 

11.1V 1300mAh 20/40C Battery – AN/PEQ Size

Electro River™ is a new quality on the LiPo battery pack market. The manufacturer has set for himself a goal to create a product whose quality will match even the best players on the market of batteries whilst at the same time retaining an attractive price. The offer includes high capacity packs designed with limited space replicas in mind – new packs are similar to a lighter in size!

High quality wiring and connectors guarantee maximum exploitation of the energy potential of the battery by minimizing losses during energy transfer. Such a solution also prevents overheating of the contacts Every cell has a Nanosafe® safeguard in order to minimize the risk of potential fire of the pack as a result of damage.

Due to Subzero Power® technology, the low temperature efficiency has been increased. Even in temperatures below zero the level of self-discharge is very low. High quality craftsmanship of each cell and other elements provides minimal internal resistance and voltage durability under stress. The abovementioned features have allowed to achieve up to 20% more charging cycles than in other Li-Po batteries! This makes Electro River™ products a very attractive offer both for beginners and advance LiPo battery users.

Lithium-Ion-Polymer (LiPo) packs are successors to the known Lithium-Ion (LiIon) packs. The basic advantage of LiPo is undoubtedly the ratio of capacity to size. The packs are of very small size whilst maintaining a very large electric efficiency, which allows for choosing an appropriate pack for practically every AEG replica. Do not feature memory effect. Can be charged very frequently, without the need to be fully discharged. Frequent charging is beneficial for every type of a battery.

It is crucial to remember not to discharge a LiPo pack to a level of less than 3V per cell and not to overcharge over 4,2V per cell. Another advantage of LiPo packs is a small percentage rate of self-discharge. Unused pack will lose approximately 3-5% of energy per month. It is important to pay attention to an unused pack as there is a risk that as a result of not being used over a prolonged period of time it can be discharged beneath the acceptable minimal value (3V per cell) and inadvertent chemical reactions may occur, which lead to a deterioration of the pack’s properties including a permanent damage and, in extreme cases, fire. Unused LiPo pack should be charged to an average of 70%.

Properly used, a LiPo pack has an exploitation period of on average 500-700 cycles. An important factor is the temperature that LiPo packs can work in. In contrast to other batteries, LiPo cells perform well in low temperatures. However, they should be charged in room temperature. In order to maintain the good condition of LiPo batteries it is required to balance them during charging with a service connector, which most LiPo packs have (a good LiPo charger features an in-built balancer).

Attention:
Product intended for installation in mock AN/PEQ modules.

Electro River Flux Universele Lader voor LiPo en NiMh accus

19.95 incl. BTW

 

Flux™ Universal Charger

Electro River™ – We give life to your devices

Electro River™ is a new quality on the power supply market. The manufacturer has set for himself a goal to create a product whose quality will match even the best players on the market of batteries whilst at the same time retaining  an attractive price. Electro River™ attempts to meet the needs of players. The brand’s offer includes efficient LiPo packs in many types and sizes, microprocessor chargers and accessories.

Each river starts its course from a source. Exactly the same as the Electro River battery, which will not be able to operate efficiently without the powering source that is the charger. Flux™ is an economic and intelligent microprocessor charger, which allows for reliable charging of the  most popular cell types  available on the market (LiPo/LiFe/NiMH). The charger is equipped with a balancer and easy to read information display system, based on colour LED diodes.

Charger Specification:

Input Voltage: 100-240V (AC)
Charging Voltage: 3A max
Max Charging Rate: 25W
Charger Type: LiPo/LiFe/NiMH
Balancing Current: 200 mAh

ATTENTION
This charger IS NOT suitable to charge multiple batteries / accumulators one after another, doing this may lead to internal parts being damaged. Thus a pause of at least 2 hours long is required between each consequent recharge.

The set includes:

– charger
– power cable
– set of Tamiya small/large
– manual

GFC Lader voor Ni MH Accus Smartcharger

14.95 incl. BTW

Smartcharger van GFC met extra adapters voor Tamiya klein en groot

 

Technical specifications

Input: 110-240V AC
Max. current: 2000mA
Number of NiMH cells: 5-8
Interface: 2 LED diods
Connection type: Tamiya L / S
Weight: 113g, excluding cord
Dimensions: 90 x 58 x 35 mm

    Set includes:

– charger
– power cord

Smart Battery Charger GFC Energy

39.95 incl. BTW

Description

Smart Battery Charger GFC Energy

A compact, universal charger with built-in balancer. It can be used to charge LiIon, LiPo, LiFe, Ni-Cd, Ni-MH, PB type accumulators.

The charger comes with 220V socket cord. The built in AC is noteworthy.

Charger features:

Charging LiIon, LiPo, LiFe, Ni-Cd, Ni-MH, PB type accumulators

Built-in balancer

Adjustable voltage setting

Electronic (microprocessor) control

Built-in AC

Charger Specification:

Input voltage: 11-15V or AC/DC 100-230V 5A

Charging current: 0.1~4.5A

Ni-MH/Ni-Cd cells number: 1~15

Li-Ion/Poly cells number: 1~6

The set includes:

-Charger

-Socket cord

-12V DC Charging cord (Jack – Alligator clamps)

-1x DEAN – Tamiya small adapter

-1x Tamiya small – Crimps adapter